Products - 62 Series Multi Stack Cartridge Housing
61 Series | 62 Series, 1 x 700 | 63 Series | 64 Series

Filter Cartridges

Tech Data

News

New Products

Contact Us

Home

The 62 Series Multi cartridge housing is available with 3, 5, 10, 15, 19 & 30 element stacks up to 40" long. The top opening style is equipped with a Cast Vee clamp as standard (3-15 stacks) and Rathmann style bolted closures (19 & 30 stacks) for pressures ranging from 6 - 10 bar.g. Leg mounted and equipped with the more conventional dished end, these housings suit processes where there is a need to allow complete drainage of the clean chamber, therefore assisting in the general cleanliness of the process system in which the filter is to operate. With the ability to accept both standard Double Open End and Single Open End cartridges, this leg mounted, free standing housing will suit most applications.
Bolted closures are an option available for all models.

The 62 Series will accept the full range of Amazon and industry standard cartridges ranging from 0.1 to 500µm with nominal lengths of 10, 20, 30 and 40".

PED Compliance - CE Marked.


    Features include:

  • Dished bottom end allows complete drainage of clean chamber, leading to improved system cleanliness.
  • Adjustable strap legs allow the user to set inlet and outlet heights.
  • Vee clamp closures use unique 'W' style seal for reliable leak free operation.
  • Integral vent, clean and dirty drains to aid efficient filter changeout.
  • Each housing hydrostatically pressure tested.
  • Each housing etched with a unique serial number for full traceability.
  • High quality cast Vee band clamps for safety and security.
  • Internally and externally electropolished as standard.
  • Cast compression nut with integral PTFE washer for easy, hand tight cartridge sealing.
  • Wide range of options available for connection sizes and types, cartridge lengths and materials of construction.
  • Accessories available include pressure gauges, vent valves, vent and gauge kits, drain valves and bolt down plates.
  • Full housing customisation service available.

 Housing Size Selection
The 62 Series Industrial cartridge housings are available in 3, 5, 10, 15, 19 and 30 stack configurations. To view full technical specifications, click on the most appropriate housing model type from the options shown below:

Model Type Number Of Cartridge Stacks Cartridge Lengths Standard Connections Suggested Flow Rate Range (lt/min)
62 Series 3 Stack 3 10", 20", 30" 2" BSPM 30-225
62 Series 5 Stack 5 10", 20", 30", 40" 2" BSPM 50-500
62 Series 10 Stack 10 20", 30", 40" 3" BS4504 flange 200-1000
62 Series 15 Stack 15 20", 30", 40" 4" BS4504 flange 300-1500
62 Series 19 Stack 19 30", 40" 4" BS4504 flange 570-1900
62 Series 24 Stack 24 30", 40" 6" BS4504 flange 720-2400
62 Series 30 Stack 30 30", 40" 6" BS4504 flange 1200-3000

 3 Stack
Return to housing size selection
 Specification Data - 62 Series 3 Stack Industrial Cartridge Housing
Number of Cartridges 3
Nominal Cartridge Length 10", 20" or 30"
Cartridge End Cap Style Double Open Ended
Code 8 -BS222 with spear
Code A -Double 'O ring with spear
Closure Style Vee Clamp or Bolted Closure
Connection Type 2" BSPM
2" or 3" BS4504, ASA or DIN flanges, NPT Thread,
Sanitary Fittings including Tri-clamp, DIN 11851, RJT, SMS and IDF
Material 316L St. Steel or Hastelloy C22 (limited options - Please refer to Sales Office)
Gasket/Seal EPDM, Silicone, Viton or FEP/Silicone
Finish Electropolished inside and out
Vent Standard: ¼" BSPM fitted with cap
Options: Vent valve and gauge kit, Vent Valve
Drain Standard: ½" BSPM fitted with cap
Options: Drain valve kit
Accessories Available Differential Pressure Gauge, Heating Jacket


Return to housing size selection
 Technical Data - 62 Series 3 Stack Industrial Cartridge Housing
Housing Series 62 Series 3 Stack Industrial Cartridge Housing
Nominal Cartridge Length 10" 20" 30"
Max. Operating Pressure (Bar g) Vee Clamp = 10
Bolted Closure = 10
Max. Operating Temperature (° C) 110
Volume (litres)* 9.9 15.3 20.7
Dry Weight (Kg)* 13.6 16.1 18.7
*Volumes and weights are approximate; if these details are critical, then please refer to Amazon technical sales for exact details.


Return to housing size selection
 Suggested Flow Rate (lt/min)
Housing Series 62 Series 3 Stack Industrial Cartridge Housing
Nominal Cartridge Length 10" 20" 30"
>50µm Rated Cartridge 75 150 225
10-50µm Rated Cartridge 60 120 180
1µm - 10µm Rated Cartridge 45 90 135
<1µm Rated Cartridge 30 60 90
CAUTION: Suggested flow rates shown are for water viscosity liquids using depth type filters. They take no account of viscosity, dirt loading or pressure loss. Flow rate directly influences cartridge life and efficiency; for optimum performance it is advisable to select as low a flow rate per cartridge as possible.


 5 Stack
Return to housing size selection
 Specification Data - 62 Series 5 Stack Industrial Cartridge Housing
Number of Cartridges 5
Nominal Cartridge Length 10", 20", 30" or 40"
Cartridge End Cap Style Double Open Ended
Code 8 -BS222 with spear
Code A -Double 'O ring with spear
Closure Style Vee Clamp or Bolted Closure
Connection Type 2" BSPM
2" or 3" BS4504, ASA or DIN flanges, NPT Thread,
Sanitary Fittings including Tri-clamp, DIN 11851, RJT, SMS and IDF
Material 316L St. Steel or Hastelloy C22 (limited options - Please refer to Sales Office)
Gasket/Seal EPDM, Silicone, Viton or FEP/Silicone
Finish Electropolished inside and out
Vent Standard: ¼" BSPM fitted with cap
Options: Vent valve and gauge kit, Vent Valve
Drain Standard: ½" BSPM fitted with cap
Options: Drain valve kit
Accessories Available Differential Pressure Gauge, Heating Jacket


Return to housing size selection
 Specification Table - 62 Series 5 Stack Industrial Cartridge Housing
Housing Series 62 Series 5 Stack Industrial Cartridge Housing
Nominal Cartridge Length 10" 20" 30" 40"
Max. Operating Pressure (Bar g) Vee Clamp = 10
Bolted Closure = 10
Max. Operating Temperature (° C) 110
Volume (litres)* 15.6 23.6 31.6 39.6
Dry Weight (Kg)* 17.4 20.4 23.4 26.4
*Volumes and weights are approximate; if these details are critical, then please refer to Amazon technical sales for exact details.


Return to housing size selection
 Suggested Flow Rate (lt/min)
Housing Series 62 Series 5 Stack Industrial Cartridge Housing
Nominal Cartridge Length 10" 20" 30" 40"
>50µm Rated Cartridge 125 250 375 500
10-50µm Rated Cartridge 100 200 300 400
1µm - 10µm Rated Cartridge 75 150 225 300
<1µm Rated Cartridge 50 100 150 200
CAUTION: Suggested flow rates shown are for water viscosity liquids using depth type filters. They take no account of viscosity, dirt loading or pressure loss. Flow rate directly influences cartridge life and efficiency; for optimum performance it is advisable to select as low a flow rate per cartridge as possible.


 10 Stack
Return to housing size selection
 Specification Data - 62 Series 10 Stack Industrial Cartridge Housing
Number of Cartridges 10
Nominal Cartridge Length 20", 30" or 40"
Cartridge End Cap Style Double Open Ended
Code 8 -BS222 with spear
Code A -Double 'O ring with spear
Closure Style Vee Clamp or Bolted Closure
Connection Type 3" BS4504
3" or 4" BS4504, ASA or DIN flanges,
Sanitary Fittings including Tri-clamp, DIN 11851, RJT, SMS and IDF
Material 316 St. Steel or Hastelloy C22 (limited options - Please refer to Sales Office)
Gasket/Seal EPDM, Silicone, Viton or FEP/Silicone
Finish Electropolished inside and out
Vent Standard: ¼" BSPM fitted with cap
Options: Vent valve and gauge kit, Vent Valve
Drain Standard: ½" BSPM fitted with cap
Options: Drain valve kit
Accessories Available Differential Pressure Gauge, Heating Jacket


Return to housing size selection
 Technical Data - 62 Series 10 Stack Industrial Cartridge Housing
Housing Series 62 Series 10 Stack Industrial Cartridge Housing
Nominal Cartridge Length 20" 30" 40"
Max. Operating Pressure (Bar g) Vee Clamp = 8.5
Bolted Closure = 10
Max. Operating Temperature (° C) 110
Volume (litres)* 58 76 94
Dry Weight (Kg)* 50 57 64
*Volumes and weights are approximate; if these details are critical, then please refer to Amazon technical sales for exact details.


Return to housing size selection
 Suggested Flow Rate (lt/min)
Housing Series 62 Series 10 Stack Industrial Cartridge Housing
Nominal Cartridge Length 20" 30" 40"
>50µm Rated Cartridge 500 750 1000
10-50µm Rated Cartridge 400 600 800
1µm - 10µm Rated Cartridge 300 450 600
<1µm Rated Cartridge 200 300 400
CAUTION: Suggested flow rates shown are for water viscosity liquids using depth type filters. They take no account of viscosity, dirt loading or pressure loss. Flow rate directly influences cartridge life and efficiency; for optimum performance it is advisable to select as low a flow rate per cartridge as possible.


 15 Stack
Return to housing size selection
 Specification Data - 62 Series 15 Stack Industrial Cartridge Housing
Number of Cartridges 15
Nominal Cartridge Length 20", 30" or 40"
Cartridge End Cap Style Double Open Ended
Code 8 -BS222 with spear
Code A -Double 'O ring with spear
Closure Style Vee Clamp or Bolted Closure
Connection Type 4" BS4504
3" or 4" BS4504, ASA or DIN flanges,
Sanitary Fittings including Tri-clamp, DIN 11851, RJT, SMS and IDF
Material 316 St. Steel or Hastelloy C22 (limited options - Please refer to Sales Office)
Gasket/Seal EPDM, Viton or FEP/Silicone
Finish Electropolished inside and out
Vent Standard: ½" BSPM fitted with cap
Options: Vent valve and gauge kit, Vent Valve
Drain Standard: 1" BSPM fitted with cap
Options: Drain valve kit
Accessories Available Differential Pressure Gauge, Heating Jacket


Return to housing size selection
 Technical Data - 62 Series 15 Stack Industrial Cartridge Housing
Housing Series 62 Series 15 Stack Industrial Cartridge Housing
Nominal Cartridge Length 20" 30" 40"
Max. Operating Pressure (Bar g) Vee Clamp = 6
Bolted Closure = 10
Max. Operating Temperature (° C) 110
Volume (litres)* 83.5 108 132.5
Dry Weight (Kg)* 65 72.4 79.8
*Volumes and weights are approximate; if these details are critical, then please refer to Amazon technical sales for exact details.


Return to housing size selection
 Suggested Flow Rate (l/min)
Housing Series 62 Series 15 Stack Industrial Cartridge Housing
Nominal Cartridge Length 20" 30" 40"
>50µm Rated Cartridge 750 1125 1500
10-50µm Rated Cartridge 600 900 1200
1µm - 10µm Rated Cartridge 450 675 900
<1µm Rated Cartridge 300 450 600
CAUTION: Suggested flow rates shown are for water viscosity liquids using depth type filters. They take no account of viscosity, dirt loading or pressure loss. Flow rate directly influences cartridge life and efficiency; for optimum performance it is advisable select as low a flow rate per cartridge as possible.


 19 Stack
Return to housing size selection
 Specification Data - 62 Series 19 Stack Industrial Cartridge Housing
Number of Cartridges 19
Nominal Cartridge Length 30" or 40"
Cartridge End Cap Style Double Open Ended
Code 8 -BS222 with spear
Code A -Double 'O ring with spear
Closure Style Bolted Closure
Connection Type 4" BS4504, ASA or DIN flanges,
Sanitary Fittings including Tri-clamp, DIN 11851, RJT, SMS and IDF
Material 316 St. Steel or Hastelloy C22 (limited options - Please refer to Sales Office)
Gasket/Seal EPDM, Viton or FEP/Silicone
Finish Electropolished inside and out
Vent Standard: ½" BSPF fitted with plug
Options: Vent valve and gauge kit, Vent Valve
Drain Standard: 1" BSPM fitted with cap
Options: Drain valve kit
Accessories Available Differential Pressure Gauge, Heating Jacket


Return to housing size selection
 Technical Data - 62 Series 19 Stack Industrial Cartridge Housing
Housing Series 62 Series 19 Stack Industrial Cartridge Housing
Nominal Cartridge Length 30" 40"
Max. Operating Pressure (Bar g) 6
Max. Operating Temperature (° C) 110
Volume (litres)* 146.5 178.6
Dry Weight (Kg)* 120.8 130.6
*Volumes and weights are approximate; if these details are critical, then please refer to Amazon technical sales for exact details.


Return to housing size selection
 Suggested Flow Rate (l/min)
Housing Series 62 Series 19 Stack Industrial Cartridge Housing
Nominal Cartridge Length 30" 40"
>50µm Rated Cartridge 1425 1900
10-50µm Rated Cartridge 1140 1900
1µm - 10µm Rated Cartridge 855 1140
<1µm Rated Cartridge 570 760
CAUTION: Suggested flow rates shown are for water viscosity liquids using depth type filters. They take no account of viscosity, dirt loading or pressure loss. Flow rate directly influences cartridge life and efficiency; for optimum performance it is advisable select as low a flow rate per cartridge as possible.


 24 Stack
Return to housing size selection
 Specification Data - 62 Series 24 Stack Industrial Cartridge Housing
Number of Cartridges 24
Nominal Cartridge Length 30" or 40"
Cartridge End Cap Style Double Open Ended
Code 8 -BS222 with spear
Code A -Double 'O ring with spear
Closure Style Bolted Closure with Davit
Connection Type 6" BS4504 ,ASA, DIN flanges or Stub Pipe
Sanitary Fittings including Tri-clamp, DIN 11851, RJT, SMS and IDF
Material 316L St. Steel
Gasket/Seal EPDM, Viton or FEP/Silicone
Finish Electropolished inside and out
Vent Standard: ½" BSPF fitted with plug
Options: Vent valve and gauge kit, Vent Valve
Drain Standard: 1" BSPM fitted with cap
Options: Drain valve kit
Accessories Available Differential Pressure Gauge, Heating Jacket


Return to housing size selection
 Technical Data - 62 Series 24 Stack Industrial Cartridge Housing
Housing Series 62 Series 24 Stack Industrial Cartridge Housing
Nominal Cartridge Length 30" 40"
Max. Operating Pressure (Bar g) 10
Max. Operating Temperature (° C) 110
Volume (litres)* 169 219
Dry Weight (Kg)* 219 233
*Volumes and weights are approximate; if these details are critical, then please refer to Amazon technical sales for exact details.


Return to housing size selection
 Suggested Flow Rate (l/min)
Housing Series 62 Series 24 Stack Industrial Cartridge Housing
Nominal Cartridge Length 30" 40"
>50µm Rated Cartridge 1800 2400
10-50µm Rated Cartridge 1440 1920
1µm - 10µm Rated Cartridge 1080 1440
<1µm Rated Cartridge 720 960
CAUTION: Suggested flow rates shown are for water viscosity liquids using depth type filters. They take no account of viscosity, dirt loading or pressure loss. Flow rate directly influences cartridge life and efficiency; for optimum performance it is advisable select as low a flow rate per cartridge as possible.


 30 Stack
Return to housing size selection
 Specification Data - 62 Series 30 Stack Industrial Cartridge Housing
Number of Cartridges 30
Nominal Cartridge Length 30" or 40"
Cartridge End Cap Style Double Open Ended
Code 8 -BS222 with spear
Code A -Double 'O ring with spear
Closure Style Bolted Closure with Davit
Connection Type 6" BS4504 ,ASA, DIN flanges or Stub Pipe
Sanitary Fittings including Tri-clamp, DIN 11851, RJT, SMS and IDF
Material 316L St. Steel
Gasket/Seal EPDM, Viton or FEP/Silicone
Finish Electropolished inside and out
Vent Standard: ½" BSPF fitted with plug
Options: Vent valve and gauge kit, Vent Valve
Drain Standard: 1" BSPM fitted with cap
Options: Drain valve kit
Accessories Available Differential Pressure Gauge, Heating Jacket


Return to housing size selection
 Technical Data - 62 Series 30 Stack Industrial Cartridge Housing
Housing Series 62 Series 30 Stack Industrial Cartridge Housing
Nominal Cartridge Length 30" 40"
Max. Operating Pressure (Bar g) 10
Max. Operating Temperature (° C) 110
Volume (litres)* 255 315
Dry Weight (Kg)* 311 328
*Volumes and weights are approximate; if these details are critical, then please refer to Amazon technical sales for exact details.


Return to housing size selection
 Suggested Flow Rate (l/min)
Housing Series 62 Series 30 Stack Industrial Cartridge Housing
Nominal Cartridge Length 30" 40"
>50µm Rated Cartridge 2132 3000
10-50µm Rated Cartridge 1705 2400
1µm - 10µm Rated Cartridge 1279 1800
<1µm Rated Cartridge 853 1200
CAUTION: Suggested flow rates shown are for water viscosity liquids using depth type filters. They take no account of viscosity, dirt loading or pressure loss. Flow rate directly influences cartridge life and efficiency; for optimum performance it is advisable select as low a flow rate per cartridge as possible.

Home | Contact Webmaster | Privacy Policy | Copyright | Trademark | Disclaimer | Conditions of Sale | Links
Amazon Filters Ltd.
Albany Park Estate, Frimley Road Camberley, Surrey GU16 7PG UK Tel: +44 (0) 1276 670600 Fax: +44 (0) 1276 670101 www.amazonfilters.co.uk
British Standards Institute Accreditation sales@amazonfilters.co.uk