Amazon Filters UK - 62 700 Series Cartridge Housing

Suppliers

Suppliers Overview

		Products - 62 Series 1 x 700 Series Single Stack Cartridge Housing
	61 Series \| 62 Series \| 63 Series \| 64 Series

The 62 Series Single stack cartridge housing is available for 1 x 700 Series type element, 40" long. The top opening style is equipped with a Cast Vee clamp as standard and the Rathmann style bolted closure as an option. Leg mounted and equipped with the more conventional dished end, these housings suit processes where there is a need to allow complete drainage of the clean chamber, therefore assisting in the general cleanliness of the process system in which the filter is to operate.

The 62 Series will accept the 700 Series type 40” long single open end, 6” diameter depth type or high surface area type cartridges.

PED Compliance - CE Marked.

Features include:

Dished bottom end allows complete drainage of clean chamber, leading to improved system cleanliness.

Adjustable strap legs allow the user to set inlet and outlet heights.

Vee clamp closures use unique 'W' style seal for reliable leak free operation.

Integral vent, clean and dirty drains to aid efficient filter changeout.

Each housing hydrostatically pressure tested.

Each housing etched with a unique serial number for full traceability.

High quality cast Vee band clamps for safety and security.

Internally and externally electropolished as standard.

Wide range of options available for connection sizes and types and materials of construction.

Accessories available include pressure gauges, vent valves, vent and gauge kits, drain valves and bolt down plates.

Full housing customisation service available.

Specification Data - 62 Series 1 x 700 Series Single Stack Cartridge Housing

Number of Cartridges	1 x 700 Series
Nominal Cartridge Length	40"
Cartridge End Cap Style	Single Open End, 700 Series type only
Closure Style	Vee Clamp or Bolted Closure
Connection Type	2" BSPM 2" or 3" BS4504, ASA or DIN flanges, NPT Thread, Sanitary Fittings including Tri-clamp, DIN 11851, RJT, SMS and IDF
Material	316L St. Steel or Hastelloy C22 (limited options - Please refer to Sales Office)
Gasket/Seal	EPDM, Silicone, Viton or FEP/Silicone
Finish	Electropolished inside and out
Vent	Standard: ¼" BSPM fitted with cap Options: Vent valve and gauge kit, Vent Valve
Drain	Standard: ½" BSPM fitted with cap Options: Drain valve kit
Accessories Available	Differential Pressure Gauge, Heating Jacket