Amazon Filters UK - 81 Series Single Mini Bag Housing

Suppliers

Suppliers Overview

		Products - 81 Series Single Mini Bag Housing
	82 Series \| 83 Series \| 84 Series \| 85 Series \| 86 Series \| 87 Series \| 88 Series

The 81 Series - MINI bag housing is available in both single and double lengths. The top opening style is equipped with a Vee clamp as standard for pressures up to 8.5 bar.g.

These housings are widely used where low cost is of prime importance and this makes them the ideal choice to replace conventional cast stainless steel strainers. The side inlet and bottom outlet configuration is perfectly suited to duties where product changes demand a simple to clean, easy access housing. With only the basket to remove, quick and efficient cleaning is possible with the 81 Series - MINI housing.

Bolted closures and heating jackets are options available for all models.

The housing will accept the full range of Amazon and industry standard bags ranging from 1 to 1000痠 with nominal lengths of 7" (P3) and 14" (P4).

PED Compliance - Sound Engineering Practice.

Features include:

Quick release Vee clamp closure for ease of access.

Integral vent to aid efficient filter changeout.

Each housing is etched with a unique serial number for full traceability.

Internally and externally electropolished as standard.

Robust bag support basket assembly fabricated from perforated sheet rather than wire mesh for extra strength.

Positive bag seating mechanism to minimise risk of seal bypass.

Wide range of options available for connection sizes and types and materials of construction.

Accessories available include pressure gauges, vent valves, vent and gauge kits, mounting brackets, displacement pods and bag retainer cages.

Full housing customisation service available.

Specification Data - 81 Series Mini Bag Housing

Number of Bags	1
Bag Length	7" (P3 size) or 14" (P4 size)
Bag Collar Style and Size	4�" Ring or Plastic Flange
Closure Style	Pressed Vee Clamp or Flat cover with screw clamps
Connection Type	1", 1�" or 2" BSPM 1", 1�" or 2" BS4504, ASA or DIN flanges Sanitary Fittings including Tri-clamp, DIN 11851, RJT, SMS and IDF
Material	316L St. Steel or Hastelloy C22 (limited options - Please refer to Sales Office)
Gasket/Seal	EPDM, Silicone, Viton or FEP/Silicone
Finish	Electropolished inside and out
Vent	Standard: �" BSPM with cap Options: Vent and Pressure Gauge Kit, Vent Valve Kit
Accessories Available	Mounting Bracket, Heating Jacket,Displacement Pod, Bag Retaining Cage

Technical Data - 81 Series Mini Bag Housing

Housing Series	81 Series Mini Bag Housing
Nominal Bag Length	Single length (P3 size)	Double length (P4 size)
Max. Operating Pressure (Bar g)	8.5
Max. Operating Temperature (� C)	110
Volume (litres)*	2.9	4.8
Weight (Kg)*	3.7	5.2

*Volumes and weights are approximate; if these details are critical, then please refer to Amazon technical sales for exact details.

Suggested Flow Rate (lt/min)

Housing Series	81 Series Mini Bag Housing
Nominal Bag Length	Single length (P3 size)	Double length (P4 size)
Suggested Flow Rate	62.5	112.5

CAUTION: Suggested flow rates shown are for water viscosity liquids using nominally rated bags. They take no account of viscosity, dirt loading or pressure loss. Flow rate directly influences bag life and efficiency; for optimum performance it is advisable to select as low a flow rate per bag as possible. Please remember that flow rate is limited by nozzle diameter as well as filter area.